As an Amazon Associate I earn from qualifying purchases.1. PNGKNYOCN
4-pin Molex/IDE to 3 Pin CPU Fan Power Cable（2-Pack）, PNGKNYOCN 3-Pin Fan to 4-Pin Molex Pass-Through Power Adapter Cable
PNGKNYOCN - 3 pin atx fan to 4 pin Molex connector cable fan power adapter. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed.
Connector 1: loop-through 4-pin Molex connector with male and female connections. Solve the problem of insufficient 3Pin interface ports on the PC motherboard. Connector 2: 2 x 3-pin Fan Internal Male.
2. Xiatiaosann
Xiatiaosann 5 Pack 4-Pin Molex to PC Fan, 4 Pin Molex Male to 4 x 3-Pin 4 -Pin PC Case Fan Sleeved Adapter Cable, PC Fan Splitter Braided Sleeve Power Supply Cable 30cm 12-inch
Xiatiaosann - Perfect cable length: the total length of the 4-pin Molex to PC fan connector is 30cm 12 inch, which is very suitable for fan placement. Durable: the black braided sleeve can protect the wires inside, making the wires not easy to break and wear; The heat shrink tube also makes the wires and connectors stronger.
Compatible with 3/4-pin fan: compatible with pc fans with 3 Pin/4 Pin interfaces, but the CPU cannot perform PWM speed control on the PC Fan.
Stable fan operation: each fan connector has 12V, and the fan will run at a fixed Molex voltage of 12V. Note: this 4-pin molex is the actual 2-pin, and the pins are only 2 pins, but it can still work normally on your computer; the fan connector has no PWM speed control, and the PC fan can only rotate at a constant speed.
3. KabelDirekt
KabelDirekt – 20-20-20cm 4-pin Molex 5.25“ 12V to 3 x 3-pin 2-pole connector fan distribution cable
KabelDirekt - Ideal for connecting additional fans for sufficient ventilation and cooling of the PC all fans are supplied with 12 V. Molex 12 v to 3x 3-pin connector 12 v, 2-pole, without speed signal distribution cable 20-20-20 cm. Nylon sheathed, colour: black. 36 months manufacturer warranty.
| Brand | KabelDirekt |
| Manufacturer | KabelDirekt |
| Height | 3.05 cm (1.2 Inches) |
| Length | 15.24 cm (6 Inches) |
| Weight | 0.01 kg (0.02 Pounds) |
| Width | 15.24 cm (6 Inches) |
| Part Number | 832 |
| Model | 832 |
4. XMSJSIY
4-Pin IDE to 3 Pin 4-Pin Fan Adapter,4-Pin Molex to 4 x 3 Pin / 4 Pin 12V PC Case Fan Power Adapter Extension Cable
XMSJSIY - High density black sleeving cable, cable is backwards compatible with standard 3-pin fans, 10 inch length, Fans will be operated at the fixed Molex voltage of 12V. This adapter cable is compatible with all 3 pin & 4 pin fans constant speed only !!! Connector 1 - 4 Pin Molex Actual 2-Pin ; Connector 2 - Four 3 Pin or 4 Pin PC Case Fans.
The y type fan splitter adapter used to power PC case fans, does not support PWM speed regulation.
2 pack 4-pin molex to 4 x 3 pin / 4 pin pmw 12v pc case fan power adapter cable, 3-pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Molex-3Pin/4Pin Cable Splitter. 4-pin ide actual 2-pin to 3 x 3 pin / 4 pin 12v pc case fan splitter y power Adapter Cable, Power 3pin or 4pin PWM Connector PC case fan with a 4pin molex connector.
Molex to 3 pin fan adapter-cpu fan extension cable: the connector types of PWM fan extension cable includes one 4-pin molex connector and 3/4-pin male plug connector. High quality black sleeved cable, tinned copper conductor, 24awg, length is approx 27cm / 10.5 inches.
| Brand | XMSJSIY |
| Manufacturer | Yingtuyou jiaju |
| Height | 1.5 cm (0.59 Inches) |
| Length | 27 cm (10.63 Inches) |
| Width | 5 cm (1.97 Inches) |
| Part Number | ide-fan |
5. YieJoya
3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable, 4-Pin Molex to 5 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable
YieJoya - High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin or 4-pin fans. This sleeved adapter cable makes hiding the cables easy. Power four 3pin or 4pin pwm connector PC case fan with a 4pin molex connector, allows you more fan options.
Fans will be operated at the fixed molex voltage of 12V2-Pin but it still works fine on your computer, allowing adding as many fans to your PC.
30 days unconditional refund and exchange guarantee, please feel free to email us and you are entitle to get a great customer service. 4 pin molex to 5 x 3 pin / 4 pin 12v pc case fan splitter y power adapter cable.
No risk to buy: comes with 5 in 1 4 pin molex to 5 x 3 pin / 4 pin 12v pc case fan splitter, if you have any issues, sufficient quantity can meet your daily life usage and replacement. 4-pin actural 2-pin molex to 5 x 3 pin / 4 pin pmw 12v pc case fan power adapter cable, 3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable.
6. niso
Niso 2Pcs 4-Pin Molex to 3-Pin Fan Cable Connector Computer Cooling Fan Cables 12V/5V for CPU PC Case Fan
niso - The fan will run on molex's fixed voltage of 12V only a 2-pin connector is required. The cable is compatible with standard 3-pin fans. Because it is only for supply, each small 4P plastic shell is only connected to 2, no speed measurement function, no temperature control function.
It suitable for cpu pc case fan, the fan speed will be slow if on 5v, or will be higher on 12v plug. Brand new and. Allows you to four 4-pin tx3 fans to a single 4-pin molex lp4 supply connector.
The 4-pin molex connector to four 3-pin or 4-pin pwm connector PC case fans. The cable can up to 4 fans, two fans for 12V for 5V. 4. 2. 5. 1. Instructions for : two channels of 12v supply, the 12v fan runs at full speed 12V is yellow and black wire two channels of 5V supply, the 12V fan uses 5V to reduce the speed and reduce wind ! 5V is red and black wire. 3.
| Brand | niso |
| Manufacturer | niso |
| Height | 1 cm (0.39 Inches) |
| Length | 13 cm (5.12 Inches) |
| Weight | 0.03 kg (0.06 Pounds) |
| Width | 1.97 |
| Part Number | 500281368A2 |
| Model | 500281368A2 |
7. Uinfhyknd
Uinfhyknd 1Pcs 4-Pin Molex to 3-Pin Fan Cable Adapter Connector Computer Cooling Fan Cables 12V/5V DC for CPU PC Case Fan
Uinfhyknd - Use the 4-pin molex connector to four 3-pin or 4-pin pwm connector PC case fans. The fan will run on molex's fixed voltage of 12V only a 2-pin connector is required. Brand new and high quality.
Instructions for use: two channels of 12v supply, the 12v fan runs at full speed 12V is yellow and black wire two channels of 5V supply, the 12V fan uses 5V to reduce the speed and reduce wind noise! 5V is red and black wire.
1. 5. The cable can up to 4 fans, two fans for 12V DC for 5V DC. 4. The cable is compatible with standard 3-pin fans.
2. 3. It suitable for cpu pc case fan, the fan speed will be slow if connect on 5v, or will be higher on 12v plug. Because it is only for supply, no speed measurement function, each small 4P plastic shell is only connected to 2 wires, no temperature control function. Allows you to connect four 4-pin tx3 fans to a single 4-pin molex LP4 supply connector.
| Brand | Uinfhyknd |
| Manufacturer | Uinfhyknd |
| Height | 3 cm (1.18 Inches) |
| Length | 17 cm (6.69 Inches) |
| Weight | 0.01 kg (0.03 Pounds) |
| Width | 13 cm (5.12 Inches) |
| Part Number | 500281368A1 |
| Model | 500281368A1 |
8. PNGKNYOCN
4-Pin IDE Molex to 4X 3-Pin Y Type Case Cooling Fan Power Cable Adapter 12V（2-Pack）, PNGKNYOCN Molex to Fan Power Splitter Cable
PNGKNYOCN - Fan adapter cable 24awg, tinned copper conductor, length is approx 8cm / 3 inches. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. Use to connect any 3pin fan to a 4pin molex connector, The cable can add up to 4 fans4 fans for 12V DC.
Molex connector 2 pin to psu, fan connector 2 pin for powering compatible with 3pin PC fans. Does not support PWM speed regulation. Fans will be operated at the fixed Molex voltage of 12V.
9. J&D
J&D 2-Pack 4 Pin Molex to 3x PWM Fan Splitter Cable, 30cm
J&D - Providing a flexible way to position computer fans within the system case as needed, this durable splitter cable offers a connection length of 12 inch 30cm, eliminating the need to strain the connection from power supply in order to reach the fan power connection.
Our j&d 4 pin molex to 3x pwm fan splitter cable lets you connect three 4 Pin computer PWM fan 1 CPU fan connector and 2 case fans to a single Molex power supply connector, allowing you to optimized your cooling capability without having to upgrade the power supply.
Including 2 packs, the cable is compatible with popular 4 Pin PWM computer case cooling fans.
The power required to run three fans is provided by the 4 Pin Molex connector and the fans are PWM controlled so the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings. Designed with pvc flexible jacket, 24 aWG oxygen-free copper prolongs the life span of this cable as well as ensures a safe connection between power supply and fans.
| Brand | J&D |
| Manufacturer | J&D Tech |
| Part Number | SATA Cable |
| Model | 4PMol-3PWM-12in-2pk |
10. GELRHONR
GELRHONR 4-Pin Molex to 5 x 3 Pin / 4 Pin 12V PC Case Fan Power Adapter Cable,Computer Cooler Cooling Fan Splitter Y Power Cable-1.1Ft
GELRHONR - Plug and play:with the 12v pc case fan splitter y power adapter cable, your PC can be easily cooled with five fans at the same time and consumes only one connection to your power supply. Note:just used to power PC case fans, does not support PWM speed regulation.
Durability design:built with slim pvc shell and Sleeved in black nylon braided cable. This pwm splitter cable can withstand bend test of many times without reducing cable flexibility and ensure the best performance.
4-pin ide actual 2-pin to 5 x 3 pin / 4 pin 12v pc case fan splitter y power adapter Cable:This pc fans splitter connect 3 computer case fans to a single motherboard fan header, compatible with 3 pin and 4 pin PWM fan connector.
Output voltage12v:with the fan adapter cable, your pc can be easily cooled with five fans at the same time and consumes only one connection to your power supply. Fans will be operated at the fixed LP4 voltage of 12V2-Pin but it still works fine on your computer, allows you more fan options. Wide compatibility:compatible with all 12v cPU and computer case fan with 4 pin or 3 pin connector. Used for a motherboard IDE interface powering for multiple cooling fans.
PNGKNYOCN - 3 pin atx fan to 4 pin Molex connector cable fan power adapter. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. Connector 1: loop-through 4-pin Molex connector with male and female connections. Solve the problem of insufficient 3Pin interface ports on the PC motherboard. Connector 2: 2 x 3-pin Fan Internal Male.
Xiatiaosann - Perfect cable length: the total length of the 4-pin Molex to PC fan connector is 30cm 12 inch, which is very suitable for fan placement. Durable: the black braided sleeve can protect the wires inside, making the wires not easy to break and wear; The heat shrink tube also makes the wires and connectors stronger.
KabelDirekt - Ideal for connecting additional fans for sufficient ventilation and cooling of the PC all fans are supplied with 12 V. Molex 12 v to 3x 3-pin connector 12 v, 2-pole, without speed signal distribution cable 20-20-20 cm. Nylon sheathed, colour: black. 36 months manufacturer warranty.
XMSJSIY - High density black sleeving cable, cable is backwards compatible with standard 3-pin fans, 10 inch length, Fans will be operated at the fixed Molex voltage of 12V. This adapter cable is compatible with all 3 pin & 4 pin fans constant speed only !!! Connector 1 - 4 Pin Molex Actual 2-Pin ; Connector 2 - Four 3 Pin or 4 Pin PC Case Fans.
YieJoya - High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin or 4-pin fans. This sleeved adapter cable makes hiding the cables easy. Power four 3pin or 4pin pwm connector PC case fan with a 4pin molex connector, allows you more fan options.
niso - The fan will run on molex's fixed voltage of 12V only a 2-pin connector is required. The cable is compatible with standard 3-pin fans. Because it is only for supply, each small 4P plastic shell is only connected to 2, no speed measurement function, no temperature control function.
PNGKNYOCN - Fan adapter cable 24awg, tinned copper conductor, length is approx 8cm / 3 inches. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. Use to connect any 3pin fan to a 4pin molex connector, The cable can add up to 4 fans4 fans for 12V DC. Molex connector 2 pin to psu, fan connector 2 pin for powering compatible with 3pin PC fans. Does not support PWM speed regulation. Fans will be operated at the fixed Molex voltage of 12V.
J&D - Providing a flexible way to position computer fans within the system case as needed, this durable splitter cable offers a connection length of 12 inch 30cm, eliminating the need to strain the connection from power supply in order to reach the fan power connection.
GELRHONR - Plug and play:with the 12v pc case fan splitter y power adapter cable, your PC can be easily cooled with five fans at the same time and consumes only one connection to your power supply. Note:just used to power PC case fans, does not support PWM speed regulation.