As an Amazon Associate I earn from qualifying purchases.1. DASNTERED
Universal No Noise Touch Light Dimmer Switch Controlsize:2pcs, DASNTERED 4 Way Touch Light Dimmer, Sensor Light Touch Lamp Repair kit Control Module
DASNTERED - Simply replace the original sensor and add years of additional life. Practical and convenient-no need to replace the entire lamp.
Suitability-suitable for metal lamps, floor lamps, bedside lamps. It reduces the trouble of finding the switch at night. Avoid interference-there is a surge absorber, can effectively preven-t the outside world and the interference to the outside world.
4 way touch light dimmer-it uses the human body to trigger the internal chip to control the light changes. Features-use the high-grade coil, no noise, no stroboscopic, with high power factor, low temperature rise, etc.
| Brand | DASNTERED |
| Manufacturer | DASNTERED |
| Height | 1.3 cm (0.51 Inches) |
| Length | 15 cm (5.91 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 7 cm (2.76 Inches) |
| Part Number | 16305698025468 |
| Model | 16305698025468 |
2. Youmile
Youmile 4 pcs 3-Way Touch Dimmer Switch Desk Lamp Sensor Module Control Module Dimmer Repair Kit Replacement,with Wiring Caps
Youmile - Save money: after you have this dimmer, the matching wiring cap and plastic terminals can save you the money to buy electrical tape. 3-touch adjustment brightness modes: the 3-way touch sequence is LO-MED-HI-OFF, compatible with 3-way bulbs or 1-way bulbs, LED and incandescent lamps.
High quality: high quality material ABS made, touch the dimmer switch is reliable, long-term service. Voltage and power: the product is 220-240v voltage, rated power is 50Hz/15-80W, and rated current is 035a max.
Instructions for use: the brown and blue wires are connected to the plug, and the blue and red wires are connected to the light source the blue wire is connected to two sets of wires at the same time; The black wire is the touch wire, which is usually connected to the hardware plate.
3. SUNERLORY
Dimmable LED, Lamp Switch Replacement Kit with Test Pen for Incandescent, 3 Way Touch Sensor Dimmer, Touch lamp Repair kit with 3 Levels Dimming and Wiring Caps, 2 Pack Touch Control Modules
SUNERLORY - It is used for home and professional use. 3-way dimmable touch control tech: offering 3 level brightness low, High, suitable for replace defective switch of bedside nightstand lamp, side table lamp, Medium, decorative lamp or accent lamp. No delay, compact profile makes it easy to assemble to lamp base, no noise, no interruption to your family.
The product is 110-240v voltage, rated power is 50Hz/15-80W, and rated current is 035a max. Simple and quick to install: comes with 4 different colored wires and wire caps, which makes the touch sensor dimmer easy to operate.
The replacement touch switch is handy for anyone to adjust desired lighting for sleeping, amusing, and incandescent bulbs. Double-ended electrical test pen: it has a cross-head and a single-head, and a dual-purpose test pen.
Wide application: perfect for tabletop lamp, reading or working. Only suitable for thyristor Dimmable LED, holiday lights and other mood lighting. Material: made of friendly material abs. After you have this dimmer, you don't need to replace your broken light bulbs by purchasing the bulb again. Note: the touch lamp switches can be used on metal base lamp only. The touch dimmer switch is reliable and solid and can serve you for a long time.
| Brand | SUNERLORY |
| Manufacturer | SUNERLORY |
| Height | 1.8 cm (0.71 Inches) |
| Length | 14.9 cm (5.87 Inches) |
| Weight | 0.08 kg (0.18 Pounds) |
| Width | 4.9 cm (1.93 Inches) |
| Part Number | 16539034099895 |
4. MOVKZACV
MOVKZACV 3 Way Touch Light Dimmer, Touch Switch, Touch Lamp Replacement Dimmer, Touch lamp Repair Kit Control Module, Replacement Sensor
MOVKZACV - Size: about 45x32x15mm rated heating current: 1 a the Highest Voltage: 110-220 V Power: 60W Pcs:1pc, 2pcs. Suitable for metal lamps, floor lamps, bedside lamps. It eliminates the trouble of finding the switch at night. Save time and money: tired of replacing an entire lamp or over paying for a quick touch sensor replacement, this easy to install sensor is what your'e looking for! It uses the human body to trigger the internal chip to control the light changes.
Use the high-grade coil, no noise, low temperature rise, with high power factor, no stroboscopic, etc.
| Brand | MOVKZACV |
| Manufacturer | MOVKZACV |
| Height | 1.1 cm (0.43 Inches) |
| Length | 15 cm (5.91 Inches) |
| Width | 7 cm (2.76 Inches) |
| Part Number | 16225385062738 |
| Model | 16225385062738 |
5. JJSCHMRC
Lamp Desk Light Parts, 3 Way Touch Sensor Dimmer, Touch lamp Repair Kit Control Module, Touch Switch Dimmer, Touch Light Dimmer Switch Control Sensor, Replacement Sensor
JJSCHMRC - Use the high-grade coil, no stroboscopic, with high power factor, low temperature rise, no noise, etc. Size: 45x32x15mm, rated heating current: 1 A The Highest Voltage: 110-220 V. Features: it uses the human body to trigger the internal chip to control the light changes.
After sale: if you have any problems, please feel free to contac t us. There are three dimming levels high, and off, Suitable for metal lamps, floor lamps, medium, low, bedside lamps.
| Brand | JJSCHMRC |
| Manufacturer | JJSCHMRC |
| Height | 0.8 cm (0.31 Inches) |
| Length | 15 cm (5.91 Inches) |
| Width | 7 cm (2.76 Inches) |
| Part Number | 16237506969576 |
| Model | 16237506969576 |
6. Uonlytech
Uonlytech 3 Way Touch Sensor Dimmer Touch Lamp Control Module Led for Bulbs Lamp Switch
Uonlytech - Special note: the energy saving lamps is not dimmable, and 3 Way Sensor Switch only applies to ordinary light bulbs 60W or less, not suited for energy- saving lamps and LED lights, pls make sure this point before purchase.
2 * 1cm. Ac: 120v/ 240v; 50hz/ 60Hz. Dimension: 4. Low profile design makes this an easy fit for almost all lamp bases! Suitable for 3- way touch lamp. 3 levels: low, medium, high, then off. Material: plastic and copper wire. 8 * 3.
| Brand | Uonlytech |
| Manufacturer | Uonlytech |
| Height | 1 cm (0.39 Inches) |
| Length | 15 cm (5.91 Inches) |
| Weight | 0.01 kg (0.02 Pounds) |
| Width | 3.4 cm (1.34 Inches) |
| Part Number | 20J5111QAZ |
| Model | 20J5111QAZ |
7. FACULX
FACULX Touch Light Dimmer Switch Control Sensor, Table Lamp No Noise Universal 3 Way Dimmer Durable Module 220V Switch Control
FACULX - No need to replace the entire lamp. Use the high-grade coil, no noise, no stroboscopic, low temperature rise, with high power factor, etc. Low profile design makes this an easy fit for almost all lamp bases! Used in a wide variety of lamps, hotel lamps, and sconces.
Simply replace the original sensor and add years of additional life. There is a surge absorber, can effectively prevent the outside world and the interference to the outside world.
8. N+B
N+B Touch Light Dimmer Switch Control Sensor, 3 Way Light Dimmer Control Module AC220-240V Build-in Touch Lamp Switch Dimmer Replacement Sensor for Tungslen Filament Lamp 3-25W LED Light EU
N+B - Unit count: 1. 0 Output: 25-150w incandescent Lamps / Tungslen Filament Lamp. Input: 220-240v ac, 50/60hz, 08a. Us type: 120v, 60Hz. Eu output: 3-25w led driver / led light / LED Bulb. Rated current: 03a/08a.
| Brand | N+B |
| Manufacturer | N+B |
| Part Number | 1 |
9. QOTSTEOS
Touch Light Dimmer Switch Control Sensor, able Lamp No Noise Universal 3Way Dimmer Durable Module 220V Switch Control
QOTSTEOS - Simply replace the original sensor and add years of additional life. Use the high-grade coil, with high power factor, low temperature rise, no noise, no stroboscopic, etc. There is a surge absorber, can effectively prevent the outside world and the interference to the outside world.
There are three dimming levels high, low, and off, floor lamps, Suitable for metal lamps, medium, bedside lamps. Low profile design makes this an easy fit for almost all lamp bases! No need to replace the entire lamp.
| Brand | QOTSTEOS |
| Manufacturer | QOTSTEOS |
| Height | 1.2 cm (0.47 Inches) |
| Length | 15 cm (5.91 Inches) |
| Width | 7 cm (2.76 Inches) |
| Part Number | 16190969960075 |
| Model | 16190969960075 |
DASNTERED - Simply replace the original sensor and add years of additional life. Practical and convenient-no need to replace the entire lamp.
Youmile - Save money: after you have this dimmer, the matching wiring cap and plastic terminals can save you the money to buy electrical tape. 3-touch adjustment brightness modes: the 3-way touch sequence is LO-MED-HI-OFF, compatible with 3-way bulbs or 1-way bulbs, LED and incandescent lamps.
SUNERLORY - It is used for home and professional use. 3-way dimmable touch control tech: offering 3 level brightness low, High, suitable for replace defective switch of bedside nightstand lamp, side table lamp, Medium, decorative lamp or accent lamp. No delay, compact profile makes it easy to assemble to lamp base, no noise, no interruption to your family.
MOVKZACV - Size: about 45x32x15mm rated heating current: 1 a the Highest Voltage: 110-220 V Power: 60W Pcs:1pc, 2pcs. Suitable for metal lamps, floor lamps, bedside lamps. It eliminates the trouble of finding the switch at night. Save time and money: tired of replacing an entire lamp or over paying for a quick touch sensor replacement, this easy to install sensor is what your'e looking for! It uses the human body to trigger the internal chip to control the light changes. Use the high-grade coil, no noise, low temperature rise, with high power factor, no stroboscopic, etc.
Uonlytech - Special note: the energy saving lamps is not dimmable, and 3 Way Sensor Switch only applies to ordinary light bulbs 60W or less, not suited for energy- saving lamps and LED lights, pls make sure this point before purchase.2 * 1cm. Ac: 120v/ 240v; 50hz/ 60Hz. Dimension: 4. Low profile design makes this an easy fit for almost all lamp bases! Suitable for 3- way touch lamp. 3 levels: low, medium, high, then off. Material: plastic and copper wire. 8 * 3.
FACULX - No need to replace the entire lamp. Use the high-grade coil, no noise, no stroboscopic, low temperature rise, with high power factor, etc. Low profile design makes this an easy fit for almost all lamp bases! Used in a wide variety of lamps, hotel lamps, and sconces. Simply replace the original sensor and add years of additional life. There is a surge absorber, can effectively prevent the outside world and the interference to the outside world.
N+B - Unit count: 1. 0 Output: 25-150w incandescent Lamps / Tungslen Filament Lamp. Input: 220-240v ac, 50/60hz, 08a. Us type: 120v, 60Hz. Eu output: 3-25w led driver / led light / LED Bulb. Rated current: 03a/08a.
